TPI 440 - ScopePlus Handheld Oscilloscope & DMM

SKU: TPI 440
Stock: -8
Price: $349.95

Qty: - +
   - OR -   

440 - ScopePlus Handheld Oscilloscope & DMM

The TPI 440 is a hand-held oscilloscope plus autoranging DMM. The instruments large, backlit LCD display shows a reading and waveform simultaneously. In addition to the standard functions of ACV, DCV, ACA, DCA, O, Diode Test and Continuity Buzzer; the 440 measures Frequency (Hz), Capacitance, Logic and Component test functions. The 440 also has RS232 output and software for interfacing with a PC is offered as an optional accessory.

The 440 comes complete with the following accessories:
• Rechargeable batteries
• Set of standard test leads
• Charger/adapter
• Operating instructions

• 1 MHz Digital Oscilloscope..... 20 MS/s
• 4000 count true RMS DMM, autoranging
• NiCad battery + charger included
• Real time display with backlight
• Glitch capture and trend modes
• Frequency counter to 2 MHz
• Capacitance and logic test measurement
• 8 waveform storage locations
• 8 front panel setup memories
• RS-232C Port
• Optional Waveform / PC Software

440 Specifications
Size 2” x 3” (51mm x 76mm)

160 x 240




16V DC power supply (Included)

Internal 7.2V DC rechargeable battery
Operating Time 5 hours
Charging Time

3 Hours

Waveform Save 4 full screens
Setup Saves user settings
Bandwidth 1 MHz
Resolution 8 bits
Channels 1
Coupling AC, DC
Input Impedance 1.11M Ohm
Accuracy ± 3%
Max Input Voltage 1000Vp-p
Trigger Source Internal
Trigger Slope Positive / Negative
Sample Rate 20 Mega samples/second
Samples per Division 20
Update Rate Real time
Modes Single shot
Accuracy +/-0.05%
Sweep Rate 1uS to 1S in 1,2,5 sequence
DCV 400mV, 4, 40, 400, 1000V
Basic DC   Accuracy ± 0.3%
ACV 300mV, 3, 30, 300, 750V
Basic ACV Accuracy ± 0.75%
DC Amps 400uA, 4000uA, 40mA, 400mA 4A, 10A
Basic DCA Accuracy ± 0.5%
AC Amps 300uA, 3000uA, 30mA, 300mA 3A, 10A
Basic DCA Accuracy +/-0.75%
Frequency 1 Hz to 2 MHz
Basic Frequency Accuracy ± 0.05%
Capacitance 400nF, 4uF, 40uF, 400uF
Basic Capacitance Accuracy +/-3%
Resistance (Ohm) 400 §Ù, 4k §Ù, 40k §Ù, 400k §Ù, 4M §Ù, 30M §Ù
Basic Ohm Accuracy ± 0.3%
Continuity (CH1 only) < 100 ohm
Diode Test 2.5mA maximum output

FAQ on the 440 True RMS Digital Multimeter

Where do I use the 440?
The 440 is ideal for viewing industrial power signals, UPS systems, power supplies and PLC controls. Use anywhere a DMM is used.
Does the 440 measure Capacitance?
Yes, the 440 can measure up to 400 uF (microfarads).
What is the highest voltage the 440 can measure?
The 440 can measure up to 1000 DCV and 1000 ACV.
What is the lowest voltage the 440 can measure?
The 440 can measure down to 0.1 millivolts on both DCV and ACV. The scope also has a volts/division setting of 0.1 volts.
How is the RS232 port used?
With the optional A402 cable and software you can acquire data and download it to a spreadsheet.
Can the 440 measure more than 10 DCA or ACA?
Yes, TPI offers a number of amp adapters to extend the range up to 1000 amps. TPI has a wide range of optional accessories that will enable the user to measure amps, temperature, pressure, or CO.

Instruction Manual

Currently there are no reviews for this product. Share your opinion with others, be the first to write a review.

Add Your Review

Your Name:
Email Address:
Note: HTML is not translated! Your email address will not be shared with anyone.
Your Rating: 5