Instek GDS-1072-U 70MHz Digital Oscilloscope 2CH w/ TFT Color LCD Display

The GDS-1072-U is a 70MHz, 2-Channel digital storage oscilloscope with a 5.7" color TFT LCD display. Its dual sampling modes, 4,000 point record length, real-time sampling rate of 250MSa/s and an ET sampling rate of 25GSa/s provide an excellent balance of performance between memory length and sampling speed. Other major features include user-friendly menu tree operations, compact size, ergonomic design, USB host for PC connectivity and USB device port support. The GDS-1072-U is designed to meet today's most demanding engineering requirements and budgets.

USB Interface & Data Logger
The USB Host port on the front significantly enhance the data storage capability of the product. The large amount of data, including screenshot, waveform and panel setup, could be easily stored into a popular flash disk. A USB device port on the rear of the product transfers the screen image and waveform raw data to PC — and also allows your PC to remotely control the GDS-1072-U DSO.

Waveform Saving and Automatic Measurement
A total of 15 waveforms can be saved into memory to be displayed at a later time. Two saved reference waveforms and two live waveforms can be compared on the screen at the same time. All signal time and voltage related measurements can be shown on the screen simultaneously in real-time via the Measure key press.

Sophisticated Measurement Functions
Several acquisition modes and 19 auto measurement functions help you to accurately measure the characteristics of waveforms. The advanced auto-set function lets the GDS-1000-U Series automatically catch and display waveforms quickly. The arithmetic functions and FFT functions keep you aware of updated measurement results in real time. With little effort, the GDS-1000-U Series can provide the right information of testing.

Enhanced Calibration Signal Output
The GDS-1072-U has an enhanced 1kHz calibration signal. Its output frequency is adjustable from 1 kHz to 100 kHz and has an adjustable duty cycle of 5% to 95%. Due to the flexible output, the calibration output can also be used as a basic signal generator for other applications.

Includes: User's manual, Power Cord, Probe-GTP-070A-2: 70MHz (10:1/1:1) Switchable Passive Probe (one per channel)